Low Temperature Circulator (Chiller) -30℃ ~RT RECL30 Infitek USA
Description
It can be not only used to vacuumize, but also provide low-temperature cooling
water, which is the favorable assistant equipment to reduce pressure
distillation and concentration. This kind of product reduce using space, lower
vacuum degree and save water source, which is assembled with rotary evaporator
and widely used in modern laboratories.
Working Principle
This product is mechanically cooled by a totally enclosed compressor. The inner
wall of the cooling tank has cooling copper coils. The refrigerant (Freon)
continuously circulates through the coil on the inner wall of the water tank to
cool the refrigerant in the tank. And then the refrigerant is conveyed to
interlayer of the supporting equipment or the condensation coil through
built-in circulation pump and external circulation pipeline. This method can
cool the material in the reactor indirestly, and also cool & liquefie the
steam in contact with condensation tube.
Generally speaking, this product can connect with the
interlayer of a double-layer glass reactor, rotary evaporator, and condensation
coil of the reactor for usage. It is also feasible to directly put objects or
containers which need to be cooled into the bath for cooling or reaction.
The outlet pipe of this product is connected to the
lower inlet pipe of the kettle or condenser. The circulating liquid comes out
from the upper circulation port and returns to the inlet of this product
through the pipe, forming a complete circulation.
Specification
Model | RECL30-5 | |
Temperature Range | -30℃ ~RT. | |
Ambient Temperature | 5 ~35℃ | |
Ambient Humidity | ≤70% | |
Electricity | Single phase 220V,50Hz/110V, 60Hz | |
Total Power | 887W | |
Safety Protection | Delay, over-current, overheat | |
Display | LCD display, key operation | |
Temperature Control Accuracy | ±0.1℃ | |
Sensor | PT100 | |
Refrigerant | R22 | |
Condensation Coil | φ8 copper tube plated by nickel | |
Equipment Material | Cold plate spray, anti-corrosion | |
Water Tank Dimension and Volume | φ220*180mm,6.8L | |
Available Dimension in Water Tank | φ185mm | |
Cover Opening | φ200mm | |
Outer Circulation Interface | Pagoda joint with Φ12mm outer diameter (facing the left side of the equipment) | |
Dimension | 423*485*(760+ pole 400)mm | |
N.W./G.W. | 46kg/50kg | |
Shipping Dimension | 570*460*790mm | |
Quantity | 1 | |
Power | 735W | |
Cooling Capacity | 2324W | |
Circulation Pump | Power | 100W |
Lift | 4-6m | |
Flow | 20-40L/min | |
Pressure | ≤0.4MPa | |
Air Cooling Condenser
| Power | 52W |
Heating Exchange Area | 4.2m2 | |
Air Volume | 760m³/h |
Get specific details about this product from customers who own it.
Fastest Delivery within Time
Delivering Uncompromising Quality
Product Online Payment
Your Trust, Our Responsibility